ChemoMetec NC-100 - Manual (Page 37)

5 Viability tab
27
5 Viability tab
NucleoView offers the possibility of automatic calculation of the percentage and
concentration of viable cells. The results can be saved and printed or exported later (see
chapter 6 Utilities ). The Viability tab looks as shown in figure 23. The upper and middle
parts of the Viability tab consists of data relating to the total cell count and the non -viable
cell count, respectively. The results of the viability calculations are found in the bottom of
the tab.
Figure 23 The Viability tab.
5.1 Choose files for the calculation and Save result
To the far left of the Viability tab are the file lists and the paths for the total and non -
viable samples. The paths show the location of the files, which are being browsed.
In the file lists it is possible to browse through the files of the current session to choose
which file is to be used in the viability calculation as the total cell count. Once the file for
Total cell count is selected NucleoView suggest that the sample analyzed prior to this to be
the non-viable cell count. The result of the viability calculation is shown immediately.
However, it is possible to choose another file for the non -viable cell count by selecting a
different file from the non-viable file list. Again, the result of the viability calculation is