ChemoMetec NC-100 - Manual (Page 45)

6 Utilities tab
35
The viability report can be printed (using the default print er) or exported by clicking the
“Print” or the “Export” button. All of the saved results are printed or exported when the
buttons are activated, it is not, as for the result list, possible to choose which results are
to be printed or exported.
Once a viability report is exported a message box appears. The message box shows the
location and name of the exported report, see figure 29. If Excel is processing the file from
the session to export data from, the export operation cannot be completed.
Figure 29 The message box displayed when a viability report is exported. It shows the
location and name of the exported file.
When exporting a viability report the data fro m each analysis is arranged in a single line,
separated by a tabulator character. Thus, the data is placed in columns for easy processing
using a spreadsheet solution.
For further details on the location and name of the exported file see the chapter below.
If no viability data is saved in the selected session a message box will appear, see figure
30. Check if the active session is correct and then try again. If the active session is correct
there is no viability data saved. Go to the Viability tab and save the needed viability
calculations.
Figure 30 No viability data present for the selected session.
6.3.1 Location and name of exported files
The exported viability reports are saved in the same folder as the result lists: