ChemoMetec NC-100 - Manual (Page 23)

3 The structure of NucleoView TM
13
3 The structure of NucleoView
TM
NucleoView is operated through a number of tabs. The different tabs are selected by
clicking on the corresponding tab. The tabs are shown in figure 12.
Figure 12 The four tabs of NucleoView.
The default startup screen is the Measurement tab. For detailed descriptions of the
different tabs see the following chapters. An overview of the four different tabs is given
below.
3.1 Measurement tab
This is where data from the CM file received from the NucleoCounter is presented. The
presented data is: Concentration of cells in the NucleoCassette, Multiplication factor,
Concentration of cells in the suspension, Operator, Comment. Parameters s uch as the
multiplication factor, operator and comment can be changed and saved to the CM file
(provided the Data collection program mode is chosen). Please refer to chapter 4 for a
detailed description of each feature.
3.2 Viability tab
On the Viability tab it is possible to calculate the viability on basis of two files or
measurements. Choose the files and NucleoView calculates the viability (%) and the
concentration of viable cells in the original cell suspension. The result of the calculation
can then be saved for printing or exporting purposes.
3.3 Utilities tab
Here it is possible to print and export data from a chosen session or from the saved
viability calculations. The header of the prints and exports includes var ious information
and may be customized through the Utilities tab. Furthermore it is possible to change the
default settings for the measurements (multiplication factor etc.).
3.4 About
This tab displays version information of the NucleoView.