Brookfield RST Rheometer - Manual (Page 8)

Brookfield Engineering Labs., Inc. page 8 Manual No. M14-223
I.2.4 RST-CPS Rheometer
The RST-CPS Rheometer system consists of:
• Rheometer head with touch screen containing electronic unit and measuring drive integrated in
one housing
• Basic instrument with measuring bottom plate and temperature sensor Pt100
• AC Adapter
Available Accessories:
• Measuring cones and measuring plates
• Bath/Circulator* for RST-CPS-F
• Computer system
• Rheo3000 software
*The accessories in bold print are necessary for a minimal configuration.
Available Accessories:
• Start-up Assistance
• Instrument Training
• Rheo3000 Software Training
Instrument features include:
• Digital control of rotational speed and torque
• Automatic adjustment of control parameters during measurement
• Direct indication of measured and calculated values of speed/shear rate, torque/shear stress,
viscosity, temperature and time.
• Internal or external storage of datas (measured values)
• Data output of measured values to a printer
• User support by dialog mode at touch screen display
• Built-in system interface with serial standard interface (RS232-C) for connection to a computer
• USB port for connection of RST-CPS to printer, computer or USB flash drive
The RST-CPS Rheometer can either be operated manually using the touch screen display or it can be
operated under computer control. The RST-CPS Rheometer is supplied with direct drive current by the AC
Adapter.