Brookfield RST Rheometer - Manual (Page 7)

Brookfield Engineering Labs., Inc. page 7 Manual No. M14-223
I.2.2 RST-SST Rheometer
The RST-SST Rheometer has the following additional components as shown in the figure.
Figure I-2
Components:
1 Extension bellows
5 Operating handle
2 Clamp handle 6 Fastening claw
3 Work plate 7 Thumb wheel
4 Lower seat of work plate 8 Upper seat of work plate
I.2.3 Measuring Elements and Accessories for RST-CC and RST-SST
Measuring devices are not part of the standard delivery of the RST Rheometer and must be ordered
according to your measuring requirements.
Optional measuring devices available:
• coaxial standard measuring systems for RST with or without built-in temperature sensor Pt100
• temperature control device FTKY3 fur use of cylinder measuring systems in the temperature
range of -10°C … +90°C
• KE cooling device for use of cylinder measuring systems in the temperature range of -20°C …
+180°C
• measuring device ME3-CP/PP for use of cone/plate or plate/plate measuring systems in the
temperature range of -10°C … +90°C (… +180°C with cooling device)
• special measuring bobs such as vane spindles in the temperature range of -10°C … +90°C
(… +180°C with cooling device)
•