beautypg.com

Brookfield RST Rheometer User Manual

Page 36

background image

Brookfield Engineering Labs., Inc.

page 36

Manual No. M14-223

III.5.3 User Authorization and Management

When using this feature, operators are authorized to perform specific tests by a System Administrator.
For example, this feature provides the support capability to comply with the requirements of 21CFR Part
11 for the pharmaceutical industry which addfresses the controls for user access to the RST Rheometer.

Press the “Users” icon. Switch on “User Management” by putting a check mark in the box and press OK.

Figure III-29


The next screen is called “Edit User”. This is the screen used by the Administrator to add authorized
users with specific rights to perform tests.

Figure III-30


Use the three iconds at the bottom to add (Plus symbol), edit (Pencil) and delete (Waste Basket) users.

Click on the Plus symbol to add a user. The next screen allows you to enter the User’s name with up to
11 alphanumeric characters. Click OK to go to the next two screens which provide choices for user rights
which you wish to assign:

Figure III-31


The first option is “Program” which provides access to test program management. By checking the “View”
box, the user is authorized to run test programs. If the box is not checked, then the user will not be able to
run any test program. Authorization to “Create”, “Edit” and “Delete” test programs is assigned by checking
the corresponding boxes.

The same approach is used for “Measuring Systems and Users”.