Brookfield RST Rheometer - Manual (Page 12)

Brookfield Engineering Labs., Inc. page 12 Manual No. M14-223
Follow all instructions given in this operating manual. This is the only way to ensure the proper use of this
measuring instrument.
More particularly, observe all safety notes.
Danger!
Personnel and operation
Make sure that the measuring instrument is operated by
ONE instructed specialist personnel only.
Danger!
Operation
Never operate and run the measuring instrument when the instrument or power supply
components (e.g. mains cable) are damaged.
Danger!
Power supply
Switch the measuring instrument off and pull the mains plug for:
• service or repair
• moving the measuring instrument
• removal or attachment of components or accessories
• in case of danger.
Danger!
Service and repair
Service and repair work must only be performed by trained and authorized specialist
personnel
Danger!
Technical modifications
Do not make any technical modifications on the instrument! Any modification will result in the
extinguishment of implied and express warranty on the measuring instrument!
Danger!
Emergency
In case of emergency, turn off the instrument and then disconnect the electrical cord
from the wall outlet.
Danger!
Protection
If this instrument is used in a manner not specified by the manufacturer, the protection
provided by the instrument may be impaired.
Danger!
Protective Clothing
It’s recommended to wear protective goggles, gloves and snood-type cap.
Caution!
General
Observe all safety notes contained in this operating manual and read it through carefully.