General, Fax transmission, Before requesting help – Panasonic KX-F1110NZ User Manual
Page 93
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before requesting help
General
1 cannot make and receive calls.
•The power cord or telephone line cord Is not connected. Check the
connections {see page 10).
The unit does not work.
• Disconnect the unit from the telephone line and connect a known
working telephone. If the known working telephone operates
properly, call your service center to have the unit repaired. If the
known working telephone does not operate properly, consult with
your telephone company.
The unit does not ring.
•The ringer volume is set to OFF. Adjust to a suitable level (see
page 17).
The REDIAL/PAUSE button does
not function properly.
•If this button is pressed during dialing, a pause will be inserted. If
pressed immediately after a dial tone is obtained, the last number
dialed will be redialed.
The receive mode does not function
as explained on page 22.
•The ring pattern detection is set. Check it (see page 46).
During programming, 1 cannot enter
the remote fax activation code or
the remote operation ID.
•All or part of the number is the same as another code or ID.
Change the number (see pages 44 and 52).
Fax transmission
; t
The other party complains that
letters on their received document
are distorted.
• If your line has special telephone services such as call waiting, the
service may have been activated during fax transmission. Connect
the unit to a line that does not have such services. Or suspend Call
Waiting.
•An extension telephone on the same line is off the hook. Hang up
and try again.
The other party complains that dirty
patterns or biack lines appear on
their received documents.
•The glass or rollers are dirty. Clean them (see page 105).
The other party complains that they
cannot send documents.
•The junk mail prohibitor is set to ON. Program their facsimile
number for automatic dialing (see page 33) or set the junk mail
prohibitor to OFF (see page 45).
1 cannot make an international fax
call.
• Use the overseas transmission mode (see page 64).
•Add two pauses at the end of the telephone number (see page 37).
95