Panasonic KX-F1110NZ - Manual (Page 40)

Transmission using the BROAD CAST key_____________
Transmitting documents to muitistations (cont.)
The documents will be scanned and stored into memory when using the BROAD CAST key. After
transmission, the stored documents will be erased automatically.
The memory capacity is approx. 25 pages {14 pages if the Error Correction Mode on page 73 is set to ON),
based on CCITT No. 1 test chart in standard resolution. For the CCITT No. 1 test chart, see page 106.
1
2
Insert the documents FACE DOWN.
Press [BROAD CAST).
•The documents will be fed into the unit and
scanned into memory. Then the unit will transmit
the data to each station, calling each number
sequentially.
Note:
• If you select the fine, super fine or halftone resolution,
the number of documents that the unit can transmit will
be decreased.
• If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all of the other stations
have been called.
Cancelling the broadcast setting
1. Press I STOP 1 during idle status.
Display:
cancel broad .
2. Press [START/COPY/SETÌ.
=YES [ ▼ A ]
[START/COPY/SETl
3. Press @ or S fo select “YES”.
4. Press [START/COPY/SET].
Multi Transmission report
After all of the transmissions have been completed, the unit will automatically print the following report.
Sample of a Multi Transmission report: