Setting the recording time aiert – Panasonic KX-F1110NZ User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the recording time aiert
With this feature, when the remaining time to record incoming messages becomes less than 60 seconds, the
unit will alert the user with a slow beep.
1
2
3
4
Press [MENUl
Display:
SYSTEM SET UP
Press then S-
REC. TIME ALERT
Press (START/COPY/SET).
MODE=OFF
[ ▼ A ]
Press (3 O'" (3 to select “ON”.
MODE=ON
[ T A ]
Dial keypad
• If this feature is not required, select “OFF”.
Press (START/COPY/SET).
[START/COPY/SET
5
0 Press [MENUl
Setting the memory reception alert
When received documents are stored into memory, the unit will alert you with beep tones. If you hear slow
beeps, clear the printing problem or supply paper to print the stored documents. The beep tones will stop.
1
2
3
Press [MENUl
Display:
SYSTEM SET UP
Press then [3 S-
RECEIVE ALERT
Press [START/COPY/SET].
MODE=ON
[ ▼ A ]
Dial keypad
■ fii
^ Press [3 or to select the desired setting.
• If this feature is not required, select “OFF”.
0
Press [START/COPY/SET).
0 Press [MENUl
[START/COPY/SET] ^