Panasonic KX-F1110NZ - Manual (Page 55)

To re-record a greeting message
You can change the contents of the greeting messages for the ANS/FAX mode.
1. Press 0 to start recording.
•A iong beep wili sound.
2. Speak cieariy up to 16 seconds.
• If you pause for over 2 seconds, 6 beeps will sound and the recording will stop. Repeat from
step 1 within 10 seconds.
3. When finished, press
•The new greeting message will be played.
To change to the TEL mode
You can change the setting of the receive mode from ANS/FAX to TEL from a remote location.
1. Call your unit.
2. Enter your remote operation ID.
3. Press [3 [^.
To turn the message transfer/pager call on or off
You can remotely turn this feature on or off. You must pre-program a transfer telephone number or a pager
number (see page 50).
Press jT] [jJ to turn ON the message transfer/pager
call.
•The unit will activate the previous setting.
For example:
When turning this feature ON from a remote
telephone, message transfer will be activated if
message transfer is set to ON beforehand, or pager
call will be activated if pager call is set to ON
beforehand.
Press |1] to turn OFF the message transfer/pager
call.
—If a transfer telephone number or a pager number
is not programmed, you cannot turn this feature
ON. The voice guide will prompt you.
To skip the greeting message
Press during the greeting message playback.
—The unit will skip the rest of the greeting message.
Voice guide example:
Message transfer is set.
Transfer phone number is 123456789.
or
Pager cail is set
Pager number is 098765432.
Message transfer is off.
or
Pager call is off.
Transfer phone number is not set
or
Pager number is not set
55