Panasonic KX-F1110NZ - Manual (Page 92)

Error messages on the display (cont.)
OMJ№|cRiMpDY
PC FAIL OR BUSY
•The fax function cannot be operated on the PC. The RS232C cable is not
connected correctly, or the software is not running on the PC.
PLEASE WAIT
•The unit is checking if the film is set correctly. Wait for a while.
POLLING ERROR
•The other fax machine does not have a polling feature. Check with the other
party.
REDIAL TIME OUT
•The receiving unit is busy or ran out of recording paper. Try again.
REMOVE DOCUMENT
•The document is jammed. Remove the jammed document (p. 102).
•Attempted to transmit a document longer than 600 mm (23^/8"). Press the STOP
button and remove the document (p. 102).
Divide the document into two or more sheets and try again.
REMOVE PRINTOUT
•There is too much paper on the paper stacker. Remove the printed paper. If the
display message still remains after removing the paper, a paper jam may have
occurred. Remove the jammed paper (see “When paper has jammed near the
recording paper exit” on page 101).
STARTER FILM END
•The starter film is empty. Replace the film or film cartridge with a new one
(p. 103, 104).
TRANSMIT ERROR
•A transmission error occurred. Try again.
UNIT OVERHEATED
>The unit is too hot. Let it cool down.