Panasonic KX-F1110NZ - Manual (Page 54)

Enhanced copy features
Making an extension copy
Use this feature to enlarge a document to twice the length of the paper that is currently being used in the
paper tray. This feature is used to reverse the film/paper save function (see page 65).
Sample of enlarged copy:
When you wish to enlarge the top half of the document:
Original document Enlarged copy
Top half
Bottom half
Insert the document into the
unit from the top edge side
FACE DOWN.
1
2
3
4
Insert the documents FACE DOWN.
Press [MENU].
Display:
Press then
SYSTEM SET UP
EXTENSION COPY
Press (START/COPY/SETl
COPYING
•The unit will start printing.
After printing, press [MENU].
Dial keypad
i START/COPY/SETl
Note:
•You cannot select FINE, SUPER FINE or HALF TONE
resolution for this feature.
•To make an enlarged copy of the whole page whose
length is as long as, or shorter than, the installed
paper, proceed as follows:
First insert the top half of the original document into
the feeder tray and copy. Then turn the original around
and insert the bottom half of the document into the
feeder tray and copy.