Note, Setting the silent fax recognition ring count, Changing the caller’s recording time – Panasonic KX-F1110NZ User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the silent fax recognition ring count
When a fax call is received in the TEL7FAX mode, the unit will automatically activate the fax function without
ringing. If the unit detects a voice call, it will ring. If a voice call is not answered within the selected number of
rings (3 to
6
rings), the unit will switch back to the fax mode. This is for machines that do not send a calling
tone.
1
2
3
4
5
6
Press [MENU],
Display;
Press then [¥] [^.
Dial keypad
SYSTEM SET UP
SILENT FAX RING
Press fSTART/CbPY/SET).
RING=3
[ ▼ A ]
Press (3 or (3 to select the desired number.
Press [START/COPY/SET].
Press (MENU).
I START/COPY/SET] H
Note:
•If you increase the number of rings, you may
not be able to receive documents from some
older types of facsimile machines.
Changing the caller’s recording time - ■
—
You can choose from two lengths of recording times for an incoming message.
VOX (unlimited): The unit records an incoming message as long as the caller talks (pre-selected setting).
1 MIN (1 minute): The unit will record each incoming message up to 1 minute.
1
2
3
4
5
6
Press [MENU).
Display:
SYSTEM SET UP
Press then [T] (^.
RECORDING TIME
Press (START/COPY/SET).
MODE=VOX
[ A T ]
Dial keypad
EBnn
Press (3 or to select the desired setting.
Press [START/COPY/SET],
(START/COPY/SET) S
Press [MENUI.