Panasonic KX-F1110NZ - Manual (Page 42)

Special receiving features
Remote fax receiving
(using an extension telephone to receive a fax message)
If you have an extension telephone on the same line and answer the call before your facsimile unit does, it is
still possible to receive a fax message. Use the extension telephone to dial the remote fax activation code.
This saves you from going to the facsimile unit and pressing (START/COPY/SET ].
Important:
•To activate this feature, use a touch tone telephone as the extension telephone and enter the remote fax
activation code FIRMLY.
•The remote fax activation code is set to 9” as a pre-selected setting.
Receiving using an extension telephone
I When a call is received, lift the extension
telephone handset.
When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
enter the remote fax activation code FIRMLY.
Hang up the handset.
•The facsimile unit is activated for reception.
To the same line
Extension telephone
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9, and the character *.
Dial keypad 1
2
3
4
5
6
7
8
Press [MENU].
Display:
Press then [T] (T].
SYSTEM SET UP
REMOTE FAX ACT.
Press f START/COPY/SET].
MODE=ON [ ▼ A ]
Press or to select the desired setting.
• If this feature is not required, select “OFF”.
Press iSTART/COPY/S^.
CODE=>k 9
Enter the new code number.
Press (START/COPY/SETI.
Press MENU .
[START/COPY/SET]
Note:
•Some special telephone company services
will require you to press a service access
code. If you subscribe to such services, all or
part of the remote fax activation code must
be different from the service access code.
•If the remote fax activation code is set to
“0000”, this feature will not work properly.