Setting the memory transmission 1 2, Press istart/copy/set, Transmitting documents from memory – Panasonic KX-F1110NZ User Manual
Page 38: Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Transmitting documents from memory
The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 25 pages (14 pages if the Error Correction Mode on page 73 is set to ON),
based on CCITT No. 1 test chart in standard resolution. For the CCITT No, 1 test chart, see page 106.
5
6
SYSTEM SET UP
Setting the memory transmission
1
2
3
4
Press [MENU].
Display;
Press then (T| [
5
].
MEMORY XMT
Press iSTART/COPY/SET].
MODE=OFF [ Т А ]
Press (3 oi' @ to select “ON”.
MODE=ON
[ ▼ A ]
• If this feature is not required, select “OFF”.
Press [START/COPY/SET].
Press [MENU].
Dial keypad
I START/COPY/SET I ®
Transmitting documents from memory
1
Insert the documents FACE DOWN.
Enter the telephone number by using regular
dialing, one-touch dialing, speed dialing or the
electronic telephone directory.
When using regular dialing, press
i START/COPY/SET].
•The documents will be fed into the unit and
scanned into memory.
After storing all pages, the unit will transmit the
documents.
•The amount of memory used will be shown as a
percentage on the display.
Display:
PAGES=01
Amount of memory used
Dial keypad
[START/COPY/SET]
Note:
•The stored documents will be automatically erased after transmission.
•To cancel the memory transmission, press [ЭТОР ] during or after scanning the documents.
• If you select the fine, super fine or halftone resolution, the number of documents that can be sent will be
decreased.
• If the stored documents exceed the memory capacity, the transmission will be canceled.