Replacing the film or film cartridge, Cont) – Panasonic KX-F1110NZ User Manual
Page 102
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing the film or film cartridge
(cont)
5
8
Insert the blue gear into the blue core of the
new film.
Insert the three green gears into the remaining
cores of the new film.
9
10
Insert the film into the cartridge so that the blue
gear matches the blue label on the cartridge.
Lock the four gears of the film by ((
a
)) pushing
back the top side gears and
((
b
))
pulling the
bottom side gears fon/vard until they lock into
place.
• If the film is slack, tighten it by winding the
bottom side gears.
tight
Insert the film cartridge by matching the blue
label on the cartridge with that on the unit.
Close the front cover securely by pushing down
on both ends.
•The unit will check that the film is set correctly
and the following message will be displayed:
Display:
PLEASE WAIT
• If the following message is displayed, the film
is not inserted correctly:
CHECK FILM
Reinsert it correctly.
404
Top side
gears
Bottom
side gear
Top side gear
Bottom
side gears