Press [start/copy/set, Press (start/copy/set), Transferring incoming caii messages – Panasonic KX-F1110NZ User Manual
Page 48: Cont) setting the message transfer/pager call
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Transferring incoming caii messages
(cont)
Setting the message transfer/pager call
1
Press [MENU!.
Display:
Press then 0 [^.
SYSTEM SET UP
MESSAGE TRANSFER
Press [START/COPY/SET].
MODE=OFF
[ ▼ A ]
Press [▼] or (3 to select the desired setting.
MESSAGE: transfers incoming messages.
PAGER:
caiis your pager.
OFF:
turns off this feature.
Press i START/COPY/SET],
NO.=
a: If you selected ‘"MESSAGE” in step 4:
Enter the transfer telephone number.
b: If you selected “PAGER” in step 4:
Enter your pager number.
• If this feature does not work properly, press
[REDIAL/PAUSE] more than once at the end
of your pager number to extend the paging
time.
if you wish to dispiay a message on your
pager, enter the message after your pager
number and [REDIAL/PAUSE].
Programming methods may vary depending
on the pager company. Caii your pager
company for detaiis.
•You may enter a total of 46 digits and/or
pauses.
Press (START/COPY/SET).
Dial keypad
^CDCD®
gCDCDCD
[START/COPY/SET]
8
Press [MENU].
Note:
•This feature can be turned on/off remoteiy from a
touch tone telephone {see page 55).