Panasonic SC-DK10 - Manual (Page 9)

'STEP^J
Antennas and AC power supply cord
FM indoor antenna
Twist the vinyl tip and pull off.
Fix the other end of the antenna
where reception is best.
For areas except U.S.A., Canada, Australia, N.Z. and China
Set the voltage before connection
below).
AC power supply cord
For areas except U.S.A., Canada, Australia, N.Z., China and Asia
If the power plug will not fit your socket, use the power plug adaptor
(included).
The included AC power supply cord is for use with this unit only. Do not
use it with other equipment.
Conserving power
The unit consumes power even when it is turned off with [POWER tlJ/l]. To
save power when the unit is not to be used for a long time, unplug it from
the household AC outlet. Remember to reset the radio stations and any
other memory items before using the unit again.
U.S.A. and Canada: 0.25 W
Australia, N.Z. and China: 0.6 W
Others: 0.8 W
For your reference
Information you enter into the unit’s memory, except for time, remains in­
tact for up to a week after the AC power supply cord is disconnected.
To household
AC outlet
1 > }----
--------------------------------------------------------------------------------^
AM loop antenna Voltage setting
For areas except U.S.A., Canada, Australia, N.Z. and China
Twist the vinyl tip and pull off.
Use a fiat-head screwdriver to turn the voltage selector to the appropriate
position for your area.
—^ X 127 V<-^110 V^220 V-230 V^240 V
J 2M 1
Stand the antenna up on its base.
Keep loose antenna cord away |
from other wires and cords. 1
VOLT ADJ
If the power supply in your area is 115 V or 120 V, please set the voltage
selector as follows.
For 115V: Setto 110V.
For 120 V: Set to 127 V.
Note that the unit will be seriously damaged or fail to operate correctly if
this setting is not made correctly.
____________ J
1--------------------------------------------------------------------------
X
I
Ql
tn
-S
,1
RQT5824