Panasonic SC-DK10 - Manual (Page 38)

U)
c
0
•c
2
a>
&
?
1
o
o
oc
n
DVD/CD
C
T)
► REC/STOP
%
ID>
ina
ma
Recording discs
Preparation:
• Do the preparatory steps (■* page 37).
• Press [SELECTOR] to select “DVD/CD".
№00«
1, D Insert the disc you want to record.
If play starts, press [■, TUNE MODE] twice to stop the disc.
If the disc is not in the play position (■• page 14), press
[DISC 1]-[DISC 5] to select the disc, then press (■, TUNE
MODE] twice.
Eng®g]
2
© Press [#REC/STOP].
@ Press [DVD/CD ►] to start play.
Press [#REC/STOP] to start record­
ing.
The CD starts.
•With DVDs and Video CDs, play wilt not start when you press
[•REC/STOP], Press [DVD/CD ►] to start play.
To stop recording
EITHER: Press [#REC/STOP].
The DVD/Video CD keeps playing.
The CD stops automatically.
OR: Press [■, TUNE MODE],
The CD stops, and the tape stops after making a 4 sec­
ond silent interval.
To record programmed tracks
Video CO and CD only
® Program the tracks page 22, steps 1-3).
(
2 ) Press [•REC/STOP] to start recording.
Play starts.
To stop recording, press [#REC/STOP].
Disc play stops automatically.
Recording with CD MANAGER page 24)
£) CD
Record discs after selecting the required CD MANAGER mode
{1-TRACK, 1-DISC, ALL-DISC).
• If a track is cut off in the middle at the end of the front side while
recording, the track will be recorded from the beginning on the
reverse side.
•At the end of the reverse side, recording stops and the current track
will be interrupted.
• Recording pauses while discs are changing and resumes when the
disc is ready.
© Insert the disc you want to record.
If play starts, press [■, TUNE MODE] twice to stop the disc.
© Do steps 1 and 2 on page 24.
@ Press [#REC/STOP] to start recording,
Play starts.
To stop recording
Press [•REC/STOP].
Disc play stops automatically.
RQT5B24