Panasonic SC-DK10 - Manual (Page 6)

Disc information
liteesi?
discs
1i^(»fl¿BBSítegiíiDs№gg(?W
Q)
s
£
iS
OQ
This unit can playback discs bearing any of the marks:
ICOMMCT
V I D E O
nCDMRACT nCOMBftCT
iP§[g q J d §[@
I digital VIDE0I DIGITAL AUDIO
This unit does not have a DTS decoder so it cannot play audio
encoded with DTS.
This unit cannot play the following discs:
• DVD with an unsuitable region «VSD
number page 5) »CD-ROM
• DVD-Audio *CDV
• DVD-ROM eCVD
• DVD-R «CD-G
• DVD-RAM «SACD
• -I-RW »SVCD
• DVD-RW »Photo CD, etc.
• DIVX Video Disc
This unit can play CD-DA and video CD format audio CD-R
and CD-RW that have been finalized® upon completion of re­
cording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
^Finalizing is a process that enables CD-R/CD-RW players to
play audio CD-R and CD-RW,
MP3 playback
(For areas except Australia, N.Z., and China)
You can use this unit to play MP3 format audio recorded for
personal use with a computer, etc., onto CD-R or CD-RW.
Play may not be possible in some cases due to the condition
of the recording.
Discs recorded using MP3 differ to CDs in the following ways.
•Structure of the disc (example)
• Starting play from a selected chapter
Press the numbered buttons and press [ENTER].
Example: Chapter 23 [2]—[3]—[ENTER)
(Pressing [>10] is unnecessary.)
• Repeat play
You can use chapter repeat or title repeat.
• Program play, random play and CD MANAGER
You cannot use program play, random play and CD
MANAGER.
• Not compatible with multi-session recordings
If you record MP3 onto CD-R/CD-RW over a number of ses­
sions, this unit can play only the recordings made in the first
session.
• Recordings will not necessarily be played in the order you
recorded them.
The recordings will be reordered according to their titles:
numbers in numerical order first, upper case in alphabetical
order next, and lower case in alphabetical order last.
• If you play an MP3 track that includes still picture data, it will
take some time before the music itself starts playing and the
elapsed time will not be displayed during this time.
Even after the track starts, the correct play time will not be
displayed.
DVDs and Video CDs are recorded using either PAL or NTSC.
For Australia. N.Z.. China, the Middle East. South Africa and Asia
Refer to this table when selecting discs.
Example of how the picture appears on the screen
X................
TV type Disc
TV Monitor
For the Middle East, South
Africa, Australia and N.Z.
For China
and Asia
Multi-
system TV
PAL ✓ ✓
NTSC ^«1 ✓
NTSC TV
PAL X X
NTSC X ^»3
PAL TV
PAL ✓ ✓
NTSC ^»2
If you select “NTSC” in “NTSC Disc Output” page 50), the pic­
ture may be clearer.
*2 The factory preset for “NTSC Disc Output" is “PAL60", so no
changes to the initial settings are necessary.
(If your television is not equipped to handle PAL 525/60 signals
the picture will not be shown correctly.)
The factory preset for “NTSC Disc Output” is “NTSC”, so no
changes to the initial settings are necessary.
Select “PAL60” in “NTSC Disc Output” (• page 50).
(If your television is not equipped to handle PAL 525/60 signals
the picture will not be shown correctly.)
For U.S.A.. Canada. Latin America and others
The unit can playback only NTSC system discs.
The bottom part of the picture may be cut off if the Video CD played
does not comply with standards.
RQT5824