Panasonic SC-CH7 User Manual
Panasonic, Sc-ch7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- Panasonic
- CD System Stereo
- Operating Instructions
- I
- Compact disc player: control section
- 1
- Compact disc player: display section
- ® Link indicator (LINK)
- (g) Edit indicator (EDIT)
- ® Disc Indicator (DISC)
- (3) Multi-display
- @ Fade end Indicator (FADE END)
- 0 Repeat indicator (o)
- (§) Auto space indicator (AUTO SPACE)
- (H) Pause indicator (II)
- 0 Play indicator (>)
- 0 Program cancel Indicator (CANCEL)
- ® Program play indicator (PROGRAM)
- 0 Al edit-recording Indicator (Al)
- @ Tape side indicator (^ A, ^ B)
- (n) Track number indicator (1-^)
- ® "Over” mark (^)
- ® Peak search indicator (PEAK SEARCH)
- (continued)
- 0 Timer set button (TIMER SET)
- (2) Timer select buttons (T SELECT A)
- 0 Remote signal sensor (SENSOR)
- 0 Band select button (BAND)
- 0 Preset-tuning'buttons (V PRESET A)
- 0 Timer cancel button (CANCEL)
- © Power “STANDBY (!)/ON” switch (POWER STANDBY (!)/ON)
- 0 Timer setting confirmation button (RECALL)
- 0 Clock set button (CLOCK SET)
- 0 Memory button (MEMORY)
- ® Tuning buttons (▼ TUNING A)
- Tuner: display section
- ® Timer play/recording indicator (PLAY, REC)
- (g) Timer mode-indicator (Q ONCE, WEEKLY)
- ® Day dispiay (SUN-SAT)
- (g) Sieep indicator (SLEEP)
- (e) Timer ON/OFF indicator (ON, OFF)
- 0 Time display
- d) FM Stereo indicator (STEREO)
- ® Band indicator (FM, MW, LW)
- 0 Digital frequency display
- 0 Quartz lock indicator (QUARTZ LOCK)
- 0 Memory Indicator (MEMO)
- 0 Preset channel display
- @ FM mode indicator (AUTO, MONO)
- (continued)
- Amplifier : control section
- 0 Sound effect level control (SOUND JOG)
- @ Ambience enhancement button (SPACE)
- @ Spectrum mode-eelect/demonetratlon button (-SPECTRUM MODE—DEMO)
- 0 Super bass indicator
- 0 Super bass button (SUPER BASS)
- 0 Volume preset button (VOL. PRESET)
- 0 Volume level control (VOLUME)
- 0 Equalization function button (ON/FLAT)
- 0 Headphones Jack (PHONES)
- 0 Microphone Jack (MIC)
- 0 Equalization mode-select/recall button (-MODE—RECALL)
- ® Input selectors and indicators
- ® Standby Indicator (STANDBY)
- Compact disc player: display section
- I
- Amplifier: display section
- ® Ambience enhancement mode indicator (SPACE)
- (g) Spectrum analysis dispiay
- ® Level meter
- (3) Ambience enhancement adjustment indicator (SPACE)
- ® CD edit indicator (EDIT)
- 0 Volume level display
- ® Sound effect indicator (▼ SOUND JOG A)
- (R) Equalization mode Indicators (HEAVY-CAR ST)
- 0 “USER” indicator (USER)
- 0 Volume indicator (VOL.)
- ® Muting indicator (MUTING)
- (continued)
- Cassette deck: control section
- 0 Deck1/deck2 selector (DECK 1/2)
- (2) Dolby noise reduction button (DOLBY NR)
- @ Reverse mode button (REVERSE MODE)
- ® Tape counter reset button (COUNTER RESET)
- ® Edit speed button (SPEED)
- (g) Synchro-start button (SYNCHRO START)
- 0 Record/record standby button (• REC PAUSE)
- (g) Fast-forward/rewind/music select buttons {« (MS). (MS) ►►)
- @ Playback buttons (O. >)
- ® Elect button (^ EJECT)
- Q Stop button (□)
- Cassette deck: display section
- ® Playback indicator (PLAY)
- (B) Tape travel direction indicators
- ® Dolby noise reduction indicators (d),
- (§) Tape counter
- ® Edit indicator (EDIT)
- 0 Recording indicator ([rH)
- ® Tape indicator
- (R) Deck 1 operating indicator (DECK 1)
- 0 Reverse mode indicators (^,crp,CjO)
- 0 Edit speed indicators (x1, x2)
- ® CD Indicator (CD)
- 0 Deck 2 operating indicator (DECK 2)
- Switch ON the power.
- Select the desired audio source.
- Start the sound source.
- Adjust the voiume level.
- After listening is finished
- To listen through headphones
- To use a microphone
- Spectrum display
- To temporarily reduce the volume level
- Listening to compact discs
- Listening to tapes
- Listening to radio broadcasts
- About the voiume levei
- Sequencial play
- Program play
- 1 Press the function selector button marked “CD 10 KEY”.
- 2 Press the program button.
- 3 Press the numeric buttons in the desired track sequence.
- 4 Press the play button.
- BTo cancel program play
- M To enter additional program
- ■ To cancel an entire program
- ■ To cancel the selected tracks one by one [CANCEL I
- 1 Press the function seiector button marked “CD 10 KEY”.
- 2 Press the numeric button corresponding to the desired track number.
- Press the repeat button.
- ■ To canoei repeat piay
- Skip play
- Search play
- (►►).
- •To search backward, press the search button
- {◄^).
- 1 Press the eject button, and then insert the cassette to be used for playback.
- c. Press the Dolby noise reduction button to set the Dolby NR mode B or C in which the tape was recorded.
- 3 Select the reverse mode.
- 4 start playing the tape.
- ■ To stop tape playback
- ■ Auto tape selector function
- 1 Press the eject buttons, and then Insert the cassettes in decks 1 and 2.
- 2 Press the reverse mode button to set the ” cxj ” mode.
- 3 Press the Deck 1/Deck 2 selector to seiect deck 1.
- 4 start playing the tape in deck 1.
- ■ To Stop the tape mid-way
- To select beginning of a tune (MS: music select)
- Automatic memory presetting
- 1 Select the desired band (“FM”, “MW” or “LW").
- Set to the frequency from which you want to start automatic memory presetting.
- Press and hoid the memory button; release it when the display frequency begins to change.
- ■ To confirm the stations which are preset to each channel
- ■ Frequency tuning (“TUNING” buttons)
- ■ MW allocation
- ■ LW freq shift
- 20.
- 1 Press the band select button to select the
- desired band *‘MW” or “LW’’).
- 2 Press the appropriate tuning button to tune to the desired broadcast.
- 3 Press the memory button momentarily.
- Select the desired “channel”
- 5 Press the memory button momentarily.
- 6 Repeat the above procedures to make memory presettings.
- ■ FM mode (FM AUTO, MONO) memory
- Memory tuner operation
- Press one of the preset-tuning buttons to select the desired channei.
- M if noise is excessive in FM broadcasts
- Press the FM mode button.
- ■ Back-up memory
- 1 Press the Input selector button marked
- U Press the Input selector button marked
- ‘DAT”.
- “PHONO”.
- Operate the turn table system.
- ■ To record on a DAT tape.
- 7 Turn down the volume.
- 2 Connect a microphone.
- 3 Play the desired source and adjust the volume level.
- 1 Press the equalization function button to ON.
- 2 Press the equalization mode-select/recall button to select desired tone quality.
- ■ When the equalizer effect is not necessary
- ( The preset equalization curves
- To store a desired equalization curves
- To listen with augmented bass (SUPER BASS)
- To Change the equalization curve and ambience enhancement continuously
- ( The ambience enhancement effect
- To enjoy ambience enhancement with equalization effect
- Quick-reverse function (Peck 2)
- To erase a recorded tape (Peck 2)
- 1 Pres« the Input selector button on the amplifier marked *TAPE'\
- 2 Insert the recorded tape Into the deck 2.
- 3 Press the Dolby noise reduction button to go off the Dolby noise reduction Indicator.
- 4 Select the desired reverse mode.
- 5 Press the record/record standby button.
- 6 Press the playback button corresponding to the side to be erased.
- Dolby NR system
- Sequencial editing (NORMAL)
- 1 Carry out the steps 1 and 2 of “Recording” on page 40.
- 2 Press the input selector button on the amplifier marked “CD”.
- 3 Load a disc.
- 4 Press the edit mode button once to indicate “C-AUTO”.
- 5 Press the play button.
- ■ When the edit indicator and CD indicator on the cassette deck does not iliuminate
- ■ To stop edit recording
- ■ To record another disc on the tape left
- Editing with consideration to the specified tape length (TAPE LENGTH)
- 1 Carry out the steps 1 and 2 of “Recording” on page 40.
- 2 Press the input seiector button on the ampii- fier marked “CD”.
- 3 Load a disc.
- 4 Press the edit mode button to seiect the tape iength.
- ■ To specify a tape iength other than C-46 60,90
- 5 Press the piay button.
- ■ To record another disc on the tape left
- Amplifier: display section
- I
- (continued)
- Al edit recording (Al)
- Carry out the step 1 and 2 of “Recording” on page 40.
- Press the Input selector button on the amplifier marked “CD”.
- Load a disc.
- Press the Al edit button.
- ■ To record another disc on the tape left
- 1 Switch the disc to another when recording of the first disc has finished.
- 2 Press the piay button to start recording.
- To record from deck 1 to deck 2
- 1 Insert the blank tape Into deck 2 and the pre-recorded tape into deck 1.
- 2 Select the desired reverse mode.
- 3 Press the edit speed button to select the recording speed “xl” or *‘x2”.
- 4 Press the synchro-start button to start edit- recording.
- To stop edit-recordlng
- ■ To change the direction of tape travel
- ■ While edit-recording Is taking place
- Types of timer operations
- Timer sequence of priority
- Timer functions
- Tuner timer setting (ONCE)
- Tuner timer setting (WEEKLY)
- To cancel a timer setting
- To confirm the timer setting
- To preset the volume level for timer play
- DDDoo
- Common operation controls
- © Power switch (Ioff/on[|
- (2) Function seiector buttons
- (CD 10 KEY, TUNER 10 KEY, DAT, PHONO)
- (D Equailzation function button (EQ ON/FLAT)
- ® Equaiization mode-seiect button (EQ MODE)
- (D Muting button (MUTING -20 dB)
- ® Easy piay buttons (EASY PLAY)
- ® Super bass button (SUPER BASS)
- (g) Sound effect ievei buttons (▼ SOUND EFFECT A)
- (g) Ambience enhancement button (SPACE)
- (Q) Voiume ievei controi buttons (T VOLUME A)
- Tuner controls
- D OOOO lÒÓCDOO
- Compact disc player controls
- Cassette Deck controls
- Common operation controls
- (◄◄, ►►)
- I