Panasonic SC-CH350 User Manual
Panasonic, Ììimììiwf*^0, Sc-ch350
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Panasonic
CD Stereo System
SC-CH350
Operating Instructions
ziTJ
. '-'fi
li.
Il
^ìiMi
if »
ÌÌiMÌÌIwf*^0
llS® ilJJÌ# *
i
Notes:
•Specifications differ according to the area code.
•The "EB” area code, for example, indicates United Kingdom specifications.
•The “EB” indication is shown on the packing case.
Before operating this unit, please read these instructions completely.
GN
nCOMRftCT
[
i
1
d
§(§
DICnAL AUDIO
RQT1791-B
F1292B0
Table of contents
Document Outline
- Table of Contents
- Caution for AC mains iead
- Suggestions for Safety
- ■ Use a standard AC wall outlet
- ■ Grasp the plug when disconnecting the power supply cord
- ■ Place the unit where it will be well ventilated
- ■ Be sure to place the unit on a fiat, level surface.
- ■ Never attempt to repair nor reconstruct this unit
- ■ Take particular care if children are present
- ■ If water is spilled on the unit
- ■ Avoid spray-type insecticides
- ■ Never use alcohol or paint thinner
- ■ Disconnect the power supply cord if the unit will not be used for a long time
- ■ If trouble occurs
- Before Use
- Concerning the Remote Control
- I Battery installation
- Use of batteries
- Operation notes
- Supplied accessories
- stacking the components
- Connections
- LUOKAN 1 LASERLAITE KLASS1 LASER APPARAT
- 1 Connect the FM indoor antenna.
- 2 Connect the LW/MW loop antenna.
- Connect the AC power supply cord after you have connected all other cables and cords.
- M Optional antenna connections FM outdoor antenna (not included)
- LW/MW outdoor antenna (not included)
- ■ External unit connection Analog player
- Surround speakers
- ■ “REC OUT" terminal
- Tuner section
- Display section
- Amplifier section
- Display section
- Cassette deck section
- Compact disc player section
- Memory presetting
- 1 Press the band-select button to select FM, LW or MW.
- 2 Press TUNING to select the MANUAL tuning mode.
- 0Tune In your favorite station using the jog dial.
- @ Press SET.
- Repeat steps 3 through 4 to memorize a station in each of the remaining preset channels.
- ■ From the main unit
- 1 Press the band-select button to select FM, LW or MW.
- 2 Press TUNING to select PRESET.
- 3 Turn the jog dial to select the desired preset channel number.
- S If noise is excessive in the FM mode Press FM MODE/B.P to monaural position.
- ■ From the remote control
- 1 Press TUNER/BAND to select FM, LW or MW.
- 2 Press the numeric button corresponding to the preset channel you wish to tune in.
- Sequential play
- Program play
- ■ From the main unit
- 1 Press the CD input select button.
- 2 0Turn the jog dial to select the track you
- 0 Press SET.
- 4 Press the CD play button.
- ■ Program memory function
- Repeat step 2 for each track you wish to program in sequence.
- ■ From the remote control
- 1 Press the CD input select button.
- 2 Press PROGRAM.
- 3 Press the numeric buttons to select the track numbers.
- 4 Repeat step 3 until you have completed the program.
- 5 Press the CD play button.
- Program play (continued)
- Direct access play
- Special features
- To play back prerecorded cassettes
- Listening to two tapes consecutively
- To fast forward or rewind the tape
- To record from the radio or external source
- Switch on the power.
- 1 Press the deck 2 eject button to load a cassette in deck 2.
- 3 Press REVERSE MODE to select the reverse mode you want to use.
- ■ When you record from the compact discs
- After pressing REC PAUSE;
- ■ To briefly interrupt recording
- Press REC PAUSE.
- ■ To stop recording
- Press the cassette deck stop button.
- ■ To erase a recorded tape (Deck 2)
- ■ To record with desired tone
- ■ To use the beat proof function Press FM MODE/B.P on the tuner section.
- Sequential CD recording (ALBUM)
- Switch on the power.
- 1 Press the CD input select button.
- 2 Press OPEN/CLOSE on the CD player to load a disc.
- 3 Press CD EDIT.
- 4 0Turn the jog dial to select ALBUM.
- 5 Load a cassette in deck 2.
- 6 Press DOLBY NR when making a Dolby NR recording.
- 7 Press REVERSE MODE to select the “ "
- 8 0 Turn the jog dial to specify the length of the
- Press SET.
- 9 Press the CD play button for automatic recording.
- ■ About Automatic Tape Level Setting (ATLS)
- Press the CD stop button twice.
- ■ To record with straight sound tone
- ■ To record with desired tone
- (continued)
- Tape length priority recording (FIT)
- 1 Press the deck 2 eject button to load a cassette in deck 2.
- 2 Press DOLBY NR when making a Dolby NR recording.
- 3 Press REVERSE MODE to select the “ ”
- 4 Press the CD input select button.
- 5 Press OPEN/CLOSE on the CD player to load a disc.
- 6 Press CD EDIT.
- 7 0 Turn the jog dial to select FIT.
- (D Press SET.
- Press the CD stop button twice.
- You can confirm the play sequence on the display by pressing the skip/search button in the stop mode.
- (continued)
- Program edit-recording (PROGRAM)
- 1 Press the deck 2 eject button to load a cassette in deck 2.
- 2 Press DOLBY NR when making a Dolby NR recording.
- 4 Press the CD input select button.
- 5 Press OPEN/CLOSE on the CD player to load a disc.
- 6 Press CD EDIT.
- 7 (T) Turn the jog dial to select PROGRAM.
- 8 0 Turn the jog dial to select the length of the tape you are using.
- ■ To confirm the play sequence
- You can confirm the play sequence on the display by pressing the skip/search button in the stop mode.
- (continued)
- To record from another disc on the remaining blank portion of the tape (LINK)
- 1 Press OPEN/CLOSE to replace the disc.
- 2 Press CD EDIT.
- 0Turn the jog dial to select the desired editing mode.
- Press SET.
- 4 Press the CD play button for automatic recording.
- 5 If you record from more discs, follow the above procedure.
- ■ To cancel the link-edit recording
- Press the stop button in the deck section.
- 1 Press the TAPE input select button.
- 3 Select the desired reverse mode.
- Press one of the one
- ■ To stop the tape-to-tape-recording
- ■ To record another tape on the remaining blank tape
- Changing the Tone
- To retrieve the equalization curves preprogrammed to this system
- About equalization curves preprogrammed to this unit
- To change the equalization curve continuously (Demonstration function)
- To store a desired equalization curves (USER curve)
- 1 Press -EQ MODE-FIXED/USER momentarily to seiect the desired equaiization curve.
- Press one of EQ LEVEL to adjust the equalization effect.
- While playing the desired source. Press SURROUND to ON.
- ■ To cancel the SURROUND effect Press SURROUND once again.
- 1 Press CLOCK/TIMER.
- 2 0 Turn the jog dial to select P-TIMER.
- 0 Turn the jog dial to select the hour you wish timer play to begin. In this case, set it on 7.
- (D Press SET.
- 0 Press VOL. PRESET to set the volume level for timer play.
- (2) Adjust the volume level using the volume level control.
- (3) Press VOL. PRESET again.
- 6 Press one of the input select buttons.
- 7 Press PLAY TIMER.
- ■ When you have made a wrong setting on steps 1 to 4 (on page 50)
- Press CANCEL.
- Press CLOCK/TiMER in the power standby mode.
- ■ To cancei timer piay Press PLAY TiMER.
- ■ To change the timer setting
- ■ To change the source oniy
- ■ To use the play timer everyday
- Switch on the power.
- 1 Press CLOCK/TIMER.
- 2 0 Turn the jog dial to select R-TIMER.
- 0 Press SET.
- 0 Press SET.
- 0 Press SET.
- Press SET.
- 5 Press the TUNER input select button and tune in the station whose broadcast you want to record.
- ■ To confirm timer recording
- ■ To cancel timer recording Press REC TIMER.
- ■ To change the timer setting
- ■ To change the source only
- ■ To stop the timer recording on the way
- To use the sleep timer
- Enjoying the Microphone Mixing
- Using an External Unit
- Care & Use