CANOGA PERKINS 9145 Network Interface Device - Manual (Page 85)

9145 Network Interface Device 5-1
Chapter 5
Specifications
9145 Specifications
Standards: IEEE 802.3
Dimensions: 1.72" H x 12" W x 11.75" D (44 x 341 x 298 mm)
Weight: 5.5 lb (2.5 Kg)
Operating Temperature: 0° to 50° C
Operating Humidity: Up to 90% (non-condensing)
Power: 100 VAC to 240 VAC (auto-ranging), ~0.15 A, 50 to 60 Hz
-36 VDC to -72 VDC, 0.6A
Regulatory Compliance
• ETL, cETL & LVD (UL 60950 CAN/CSA C22.2 No. 60950, EN/IEC 60950)
• EMC Directive (EN55022 Class A, EN 55024, EN 61000-3-2/-3-3)
• CE
Mark
• FCC Part 15B Class A (U.S.)/ICES-003 (CAN)
• VCCI Class A (Japan)
• C-Tick (AS/NZS 3548 - Australia)
• CDRH CFR21/IEC 60825-1 (Laser Safety)
• NEBS Level 3 Certified & Tested
EIA RS-232 Port
The RS-232 presents a DCE Interface for terminal support.
Table 4 – EIA-232 Pinout
Pin
Number
Signal
Name
I/O
1 DCD Output – Held High
2 RXD Output
3 TXD Input
4 DTR No Connection
5 Signal GND
6 DSR Output – Held High
7 CTS Input
8 RTS Output
9 RI Not Used, connected to GND