CANOGA PERKINS 9145 Network Interface Device - Manual (Page 47)

9145 Network Interface Device 3-29
5. When ready, type [ Y ] to initiate the file transfer.
To upgrade a remote 9145, or upgrade the local 9145 from software stored on a Domain
Management Module of the UCS1000 or UCS1002 chassis through a L351 or L357 follow these
steps.
Note: SideBand Management Channel must be enabled with the remote 9145, L351 or L357.
1. Verify that SBMC is enabled on both the local and remote 9145s; details on page 3-43.
2. From the Main Menu, type [ 7 ], "Software Upgrade," and press .
3. At the Software Upgrade Menu, type [ 4 ], "Copy Software from Source unit to Destination
unit," and press .
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 12:43:48
----------------------------------TFTP SOFTWARE UPGRADE-------------------------
Time Since Last Restart 2 days 18:55:08
Host IP Address : 172.16.85.100
Save in Non Volatile RAM? : y
File Name: 9145500.zip
File transfer to unit now ? y
Please enter Y or N .
------------------------------------Messages------------------------------------
Canoga Perkins Corp. Ethernet Network Interface Device 05-Dec-2006
Model 9145-5 V05.00 F96 9145 DC_172.16.142.225 12:44:34
------------------------------------SOFTWARE UPGRADE----------------------------
Time Since Last Restart 3 days 17:06:42
Local Remote
Active Firmware 87.99 03.40
Inactive Firmware 03.40 81.20
Bootcode 06.22 06.20
Select Source Unit : Local
Use 'SPACE' to change next source, 'Enter' to validate
------------------------------------Messages------------------------------------