CANOGA PERKINS 9145 Network Interface Device - Manual (Page 21)

9145 Network Interface Device 3-3
Management User Interface
The Management User Interface for the 9145 provides screens for setup, monitoring,
and diagnostics. You can access the screens directly by connecting to the serial port of
the 9145 or using Telnet.
General Screen Format
A typical screen, shown in Figure 18, includes standard descriptions and reference
designations. Use this and other screens to configure the system, set operational
parameters, and verify the system status. All screens use a common method for
navigation.
Figure 18 - General Screen Format
Not all screens and menus provide options that you can change. Some menu items
reach screens that only report status, such as revision numbers, module type, or alarms.
On other screens, you can move through and select options, and enter data.
Canoga Perkins Corp. Ethernet Network Interface Device 29-Nov-2006
Model 9145-5 V05.00 F96 9145 D 10:13:12
---------------------------------------MAIN MENU--------------------------------
1) System Configuration
2) Diagnostics
3) Port Information
4) System Alarms
5) System Log
6) Utilities
7) Software Upgrade
8) Manage Logged In Users
9) 802.3AH OAM
10) Logout
Select [1-10]:
------------------------------------Messages------------------------------------
Model
Navigation
Instructions
Messages and
Urgent Status
Menu