CANOGA PERKINS 9145 Network Interface Device - Manual (Page 70)

3-52 9145 Network Interface Device
To display the Layer 2 Statistics, follow these steps:
1. From the Main Menu type [ 3 ], "Port Information," and press . At the Port Information
Menu, type [ 3 ], "Layer 2 Statistics," and press . The Layer 2 Statistics Screen
appears.
2. The last Frames Counter’s (1522 in the example above) size is configurable. Type [ C ] and
press to configure this counter. Valid Frame size is from 1 to 10000.
3. To display the Error Statistics Screen, type [ E ]; "Error Counters" and press .
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:03:26
--------------------------LAYER 2 STATISTICS (CURRENT)--------------------------
Local Local Remote
User Port Ext Port Offline
Link State UP UP
Speed/Duplex 100M/HALF 1000M/FULL
Frames Sent 367668 2890860
Frames Rcvd 3018236 220450
Bytes Sent 32829996 337800200
Bytes Rcvd 346053053 14120070
Undersize < 64 0 0
Oversize > 10000 0 0
Frames > 1518 0 0
Frames > 1522 0 0
Last Counter Reset: 2 days 13:19:12
Select [(C) Change Counter Frame Size, (E) Error Counters,
(T) Frame Type Counters, (CTRL-T) Raw Counters, (CTRL-R) Reset Counters]:
------------------------------------Messages------------------------------------
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:04:10
-----------------------LAYER 2 ERROR STATISTICS (CURRENT)-----------------------
Local Local Remote
User Port Ext Port Offline
Link State UP UP
Frames Sent 367837 2891621
Frames Rcvd 3019077 220493
Collisions 102 0
Late Collisions 6 0
Alignment Errors 0 0
Undersize < 64 0 0
Oversize > 10000 0 0
Fragments 0 0
CRC Errors 0 0
Jabber Events 0 0
Dropped 0 0
Last Counter Reset: 2 days 13:19:55
Select [(F) Frame Counters, (T) Frame Type Counters,
(CTRL-T) Raw Counters, (CTRL-R) Reset Counters]:
------------------------------------Messages------------------------------------