CANOGA PERKINS 9145 Network Interface Device - Manual (Page 28)

3-10 9145 Network Interface Device
Port Information
The Port Information screen shows the current conditions for all ports in the 9145 with
options to view parameters and statistics for specific ports. Configuration information
includes the model number, description, and revision; the serial number; and link,
remote fault, and physical status. You must set up each port that you will use before you
can set up or assign STP, VLANs or Tagging. Below are the sub menus where these
fields reside:
Link Status
Informs you of the current link status of both user and extension ports of the NID.
Port Configuration
This screen has several sub menus. The following is a description of the menus:
1. Hardware Information
Displays 9145 hardware information, including the installed user and
extension port modules.
2. Functional Configuration
Configures and displays parameters for an individual port
3. VLAN Configuration
The VLAN Configuration screen displays and configures VLAN parameters of
the 9145.
4. Port Filters
This lets you set filters on the user and extension ports to control traffic
coming out of these specific ports depending on the packet type.
Layer 2 Statistics
Displays current Layer two Statistics
RMON Group 1 Statistics
Short for Remote Monitoring Specification (RMON). This screen displays current
RMON statistics.
System Alarms
Displays current conditions for local and remote alarms
System Log
Displays all system events