CANOGA PERKINS 9145 Network Interface Device - Manual (Page 49)

9145 Network Interface Device 3-31
Setting General Security Parameters
General security parameters include passwords characteristics, unsuccessful long-in attempt
lockout, and inactivity timer. To set general security parameters, access the Security
Configuration Menu and follow these steps:
1. At the Main Menu, type [ 1 ], "System Configuration," and press .
2. From the System Configuration Menu, type [ 3 ], "Security Configuration," and press
.
3. At the Security Configuration Menu, type the number for the item you wish to configure
and press . Type the applicable information or press to cycle through
the options for that item. Press to select the option or to enter the information
you typed.
Password Configuration
1. Minimum Length
Minimum length in characters of a valid password. 0 – 15 Characters
2. Minimum Alpha Characters
Minimum number of Alpha (a-z) characters required in a valid password. 0 – 15
Characters, 0 disables restriction.
3. Minimum Numeric Characters
Minimum number of Numeric (0-9) characters required in a valid password. 0 –
15 Characters, 0 disables restriction.
4. Minimum Punctuation Characters
Minimum number of Punctuation characters required in a valid password. 0 – 15
Characters, 0 disables restriction.
5. Maximum Consecutive Character Types
Maximum number consecutive characters of the same character type (Alpha,
Numeric, Punctuation) allowed in a valid password. 0 – 15 Characters, 0
disables restriction.
Canoga Perkins Corp. Ethernet Network Interface Device 29-Nov-2006
Model 9145-5 V05.00 F96 9145 D 11:45:59
----------------------------SECURITY CONFIGURATION------------------------------
PASSWORD CONFIGURATION
1. Minimum Length : 0
2. Minimum Alpha Characters : 0
3. Minimum Numeric Characters : 0
4. Minimum Punctuation Characters : 0
5. Maximum Consecutive Character Types : 0
6. Maximum Same Character : 0
7. Allow username in password : Enabled
8. Password Expiration Time : 0
9. Password Reuse Count : 0
LOCKOUT/LOGOUT CONFIGURATION
10. Lockout After Failed Attempts : 0
11. Lockout Type : Hard
Lockout time : 0
12. Display Lockout Message : Disabled
13. Lockout Message : Account has been locked out
14. Lockout Craft Port : Disabled
15. Inactivity Logout time (mins) : 0
Select [1-15]:
------------------------------------Messages------------------------------------