Check port and link status – CANOGA PERKINS 9145 Network Interface Device User Manual
Page 63
9145 Network Interface Device
3-45
3. At the Functional Configuration Menu, type the number for an item and press
Pressing
Remote columns. Press
1. User Port Setting
Sets data rate and duplex option on the User Port. After typing [
1
]
Module dependant.
2. Ext Port Setting
Sets data rate and duplex option on the User Port. After typing [
1
]
Module dependant.
3. RMTF
Enables or Disables Remote Fault Forwarding (RMTF) when SBMC is enabled.
Enables or Disables Remote Fault Forwarding and Link Loss Echo (RMTF/LLE)
when SBMC disabled. Pressing
Disabled, Ext Port Enabled.
4. Link Loss Fwd
Enables or Disables Link Loss Forwarding (LLF). Pressing
the options. Options are Disabled, User – Ext, Ext – User, and Both Directions.
5. Flow Control
Enables or Disables flow control on the Remote port. Pressing
through the options. Options are Disabled, Ext Port Enabled.
6. Maximum Frame Size: Sets maximum allowable Ethernet Frame size the 9145 will
forward. Size range is 1518-10000.
7. Sideband Management
Enables or disables SideBand Management Channel (SMBC) communications with
a remote 9145, L351 or L357. When enabled, pressing
connectivity with the remote unit.
8. Remote Configuration
Displays Functional Configuration of SBMC connected remote 9145, L351 or L357.
4. To return to the Main Menu, press
Check Port and Link Status
The Port Information screen shows the current conditions for the 9145 ports. The Link Status
screen shows current conditions for the link, including SFP power. To access port and link
status, follow these steps:
1. From the Main Menu type [
3
], "Port Information," and press
screen appears.