CANOGA PERKINS 9145 Network Interface Device - Manual (Page 67)

9145 Network Interface Device 3-49
Port (Local User Port - Out VLAN) press .
The above steps will be repeated for the remote 9145 when SBMC is enabled.
4. To enable or disable use of the VLAN Translation Table on the User or Extension ports, type
[ 9 ] and press ; press to cycle through the ports.
5. To return to the Main Menu, press .
To configure VLAN Priority Bit (P-Bit) follow these steps:
1. From the Main Menu type [ 3 ], "Port Information," and press . At the Port Information
Menu, type [ 2 ], "Port Configuration," and press . At the Port Configuration Menu,
type [ 3 ], "VLAN Configuration, and press .
2. At the VLAN Configuration Menu, type [ 3 ], "P-Bit Translation Tables," and press .
3. At the P-Bit Translation Tables, type the number for an incoming P-Bit and press ,
then type values for P-bits for outgoing packets, and then press to confirm.
4. To enable or disable the P-Bit Translation Table, type [ 9 ] and press . Pressing
cycles between Local User and Extension ports and the remote 9145’s ports (when
SBMC is enabled).
5. To return to the Main Menu, press .
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:02:17
-------------------------------P-BIT TRANSLATION TABLE--------------------------
Local Local Remote
User Port Ext Port Offline
1) Incoming P-Bit 0 translated to 0 0
2) Incoming P-Bit 1 translated to 1 1
3) Incoming P-Bit 2 translated to 2 2
4) Incoming P-Bit 3 translated to 3 3
5) Incoming P-Bit 4 translated to 4 4
6) Incoming P-Bit 5 translated to 5 5
7) Incoming P-Bit 6 translated to 6 6
8) Incoming P-Bit 7 translated to 7 7
9) P-Bit Translation Enabled? No No
Select [1-9]:
------------------------------------Messages------------------------------------