CANOGA PERKINS 9145 Network Interface Device - Manual (Page 16)

9145 Network Interface Device 2-7/(2-10 Blank)
Power-Up and Front Panel Functions
The LEDs on the front panel show the system and port status. The STA and CFG LEDs
display management status. Interface Module has two, three or six LEDs, actual number is
dependant on Interface Module type.
Figure 11 – 9145 Front Panel
Figure 12 – UTP 10/100/1000 Mbps
Figure 13 – 10Mbps Optical Module
Figure 14 – 100Mbps Optical Module
Figure 15 – 1000Mbps Optical Module
During power-up, all LEDs on the 9145 and Interface Modules light amber. When start-up
has completed, the LEDs on the 9145 display status is described in Table 1. Interface
Modules display status is described in Table 2.
.