Waterworks Formwork Wall Mounted Tub Spout - Manual (Page 2)

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST
FORMWORK
Wall Mounted Tub Spout Installation Guidelines
Page 2 of 2
Rev - 01
4.8.2014
These guidelines have been prepared for the professional contractor to aid in the installation of:
FORMWORK WALL MOUNTED TUB SPOUT (STYLE No. FMTS01)
All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.
3. Hold the ESCUTCHEON up to the finished wall and
thread the SPOUT onto the NIPPLE. Do not tighten the
SPOUT onto the NIPPLE. Mark where to drill the
required Ø1/2" hole using the pre-drilled hole on the
ESCUTCHEON as shown in Figure - 03.
FIGURE - 03
4. Remove the SPOUT and ESCUTCHEON and drill the
Ø1/2" hole using the mark made in Step 3.
5. Install the TOGGLE ANCHOR in the Ø1/2" hole drilled
in Step 4 then install the ESCUTCHEON using the
SCREW provided as shown in Figure - 04. Make sure
to use the RUBBER WASHERS provided to create a
seal between the finished wall and the ESCUTCHEON.
¾ If desired, a bead of caulk or a clear silicone may be
applied where the ESCUTCHEON contacts the finished
wall. DO NOT use putty.*
FIGURE - 04
FINISHED WALL
DRILL MARK
ESCUTCHEON
SPOUT
FINISHED WALL
DRILL MARK
ESCUTCHEON
SPOUT
FINISHED WALL
TOGGLE ANCHOR
RUBBER WASHER
RUBBER WASHER
ESCUTCHEON
SCREW
FINISHED WALL
TOGGLE ANCHOR
RUBBER WASHER
RUBBER WASHER
ESCUTCHEON
SCREW
6. Thread the SPOUT onto the NIPPLE making sure the
RUBBER WASHER is between the SPOUT and the
ESCUTCHEON as shown in Figure - 05. Securely
tighten the SPOUT to create a proper seal.
¾ NOTE: The SPOUT has an AERATOR installed.
FIGURE - 05
FINISH & INSPECT THE INSTALLATION:
7. Remove the AERATOR using the tool provided then
turn on the water supply to flush out any debris in the
supply lines.
8. Inspect all connections for leaks then turn off the
water supply.
9. Re-install the AERATOR
¾ If further assistance is required, please contact Product
Support at 1-800-927-2120 Ext 2 Monday through
Friday, 8am - 6pm EST.
¾ See the service part document for parts ordering,
available on WATERWORKS.COM.
* Putty contains oil and can cause permanent
discoloration on certain materials such as marble,
granite and any porous surface.
FINISHED WALL
ESCUTCHEON
RUBBER WASHER
SPOUT
AERATOR
FINISHED WALL
ESCUTCHEON
RUBBER WASHER
SPOUT
AERATOR