Waterworks Easton Classic Low Profile Concealed Tub Filler With Handshower and White Porcelain Lever Handles - Manual (Page 2)

Easton Concealed Tub Filler with Hand Shower - Covered Installation Guidelines
W A T E R W O R K S ®
These guidelines have been prepared for the professional contractor to aid in the installation of:
EASTON
® CONCEALED TUB FILLER WITH HAND SHOWER (COVERED)
(EATU01, 02-K, 03-K, 04-K, 05-K)
All dimensions are based on original specifications and are subject to change and variation.
Please consult your Design Associate for current specifications.
12/24
FINAL CONNECTIONS AND INSPECTION:
17. Connect each of the supply hoses (33) to the adjacent side
valve making sure the hoses are not kinked.
18. Connect the female end of the flexible hose (35) to the tee
junction (32) using the washer (34).
19. Connect the knurled end of the hand shower hose (36) to the
male end of the flex hose (35).
20. Connect the side valves (13) to the water supplies (not
provided).
21. Carefully open the hot and cold valves to flush out any debris in
the supply lines before transferring the flow of water to the
hand shower.
22. Carefully inspect all connections for leaks and check for proper
operation prior to enclosing the unit.
23. For servicing the valve stem (12), unscrew the cover (6) and pull
off the handle assembly (1-9).
➢ If further assistance is required, please contact Product
Support at 1-800-927-2120 (8am-7pm EST).