Installation guidelines – Waterworks Highgate Low Profile One Hole Deck Mounted Lavatory Faucet with White Porcelain Lever Handles User Manual
Page 2

HIGHGATE
Low Profile One Hole Deck Mounted Lavatory
Faucet
INSTALLATION GUIDELINES
Page 2 of 3
6.11.2012
These guidelines have been prepared for the professional contractor to aid in the installation of:
HIGHGATE LOW PROFILE ONE HOLE LAVATORY FAUCET WITH METAL CROSS HANDLE
(STYLE# HGLS40) & WHITE PORCELAIN LEVER HANDLE (STYLE # HGLS50)
All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.
BILL OF MATERIALS:
Description
QTY
HGLS40
(Metal Cross Handle)
1 Metal
Cross
Handle
1
HGLS50
(Porcelain Lever Handle)
2
Porcelain Lever Handle
1
COMMON PARTS
3 Spout
Assembly
1
4 Rubber
Washer
1
5 Flow
Restrictor
1
6
Flow Restrictor Housing
1
7 O-Ring
1
8
Flow Restrictor Cap
1
9 Threaded
Shank
1
10 Rubber
Washer
1
11 Metal
Washer
1
12 Nut
1
13 O-Ring
2
14
Hose Adapter
2
15 Strainer
Washer
2
16
Flexible Supply Hose
2
17
Drain Body with Lift Turn Knob
1
18
Upper Drain Gasket
1
19
Lower Drain Gasket
1
20 Paper
Washer
1
21 Drain
Nut
1
22 Tailpiece
1
7. Re-thread the tailpiece (22) to the drain flange.
FINISH THE INSTALLATION:
8. Attach the hose adapters (14) to the supply valves
(SOLD SEPARATELY), with the o-ring (13).
9. Connect the supply hoses (16) to the hose adapters,
with the strainer washers (15) in the nut of the
flexible hose.
10. Carefully open the hot and cold valves to flush out
any debris in the supply lines. Let the water run for a
few minutes, then shut the supply valves off and
remove flexible supply hoses from hose adapter (14)
to access the strainer washers (15). Clean the
strainer washers of any debris and repeat Step 9.
INSPECT THE INSTALLATION:
11. Inspect all connections for leaks.
12. Close the drain and fill the sink with water to make
sure the drain stopper assembly operates and seals
properly.
13. The flow restrictor (5) is located in within the spout
body (3) and is accessible by removing the flow
restrictor cap (8) and flow restrictor housing (6).
¾
If further assistance is required, please contact
Product Support at 1-800-927-2120 (9am-6pm EST).
*
Putty contains oils and can cause permanent
discoloration on certain materials such as marble,
granite and any porous surface.