beautypg.com

Installation guidelines – Waterworks Henry Wall Mounted Articulated Pot Filler, Metal Cross Handle User Manual

Page 2

background image


PRODUCT SUPPORT 800.927.2120 8am - 6pm EST

HENRY
Wall Mounted Articulated Pot Filler with Metal Cross Handle

Installation Guidelines

Page 2 of 2

Rev - 01


10.16.2014

These guidelines have been prepared for the professional contractor to aid in the installation of:
HENRY WALL MOUNTED ARTICULATED POT FILLER WITH METAL CROSS HANDLE
(STYLE No. HNPF01, HN01PF UK)
All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.

FIGURE – 02


5. Slide the ESCUTCHEON and HEX COLLAR against the

VALVE BODY and loosen the 4 SET SCREWS on the
MOUNTING PLATE, then thread the POT FILLER onto
the 1/2" male NPT connection. Make sure to securely
tighten the POT FILLER. See FIGURE – 03.

SET SCREW (X4)

MOUNTING PLATE

ESCUTCHEON

HEX

COLLAR

SET SCREW (X4)

MOUNTING PLATE

ESCUTCHEON

HEX

COLLAR

FIGURE – 03

6. Securely tighten the SET SCREWS. The SET SCREWS

will prevent the POT FILLER from rotating.

7. Slide the ESCUTCHEON over the MOUNTING PLATE

then slide the HEX COLLAR against the ESCUTCHEON
to hold the ESCUTCHEON against the finished wall.

PRE-DRILLED

HOLES

MOUNTING

PLATE

C/L

PRE-DRILLED

HOLES

MOUNTING

PLATE

8. If desired, a bead of caulk or a clear silicone may be

applied where the escutcheons contact the finished
wall. DO NOT use putty.*

9. Remove the AERATOR from the SPOUT using the

TOOL provided then open the inlet supply water and
carefully turn HANDLE ASSEMBLY to flush out any
debris in the supply lines. See FIGURE - 04.


10. Inspect all connections for leaks then re-install the

AERATOR.

SERVICING THE POT FILLER:

11. To access the SHUT-OFF CARTRIDGE, remove the

HANDLE ASSEMBLY by unthreading the HANDLE
BASE. See FIGURE – 04.

AERATOR

REMOVAL

KEY

AERATOR

CARTRIDGE

HANDLE

ASSEMBLY

HANDLE

BASE

AERATOR

REMOVAL

KEY

AERATOR

CARTRIDGE

HANDLE

ASSEMBLY

HANDLE

BASE

FIGURE – 04

¾ If further assistance is required, please contact

Product Support at 1-800-927-2120 Ext 2 Monday
through Friday, 8am - 6pm EST.

*

Putty contains oil and can cause permanent

discoloration on certain materials such as marble,

granite and any porous surface.