Reference, Power requirements – Casio CW-L300 User Manual

Page 59

Replace the battery cover.

Important!
• The printer may suddenly turn off during printing if battery power goes low.

Because of this, use of the bundled AC adaptor is recommended to power
the printer.

• Because of the affect cold has on batteries, the “LOW BATTERY!” may appear

prematurely when the temperature is below 10˚C(50˚F). If this happens,
move the printer to a location where the temperature is within the operating
temperature range (10˚C to 35˚C (50˚F to 95˚F))

Reference

Power Requirements

You can run the printer by using its bundled AC adaptor to plug it into a power
outlet. It can also run on commercially available alkaline batteries.

■ Using Batteries

Note
• The printer can run on eight AA-size alkaline batteries. Be sure to use alkaline

batteries only.

Turn over the printer and remove the bat-

tery cover.
• Never bend or twist the battery cover,

or otherwise subject it to rough
handling. Doing so creates the risk of
printer malfunction.

Load a set of eight new batteries.

• Make sure the positive g and negative

h poles of the batteries are facing in
the proper directions.

Battery Life

Disc Label Printing
• Printing of approximately 150 discs*

Normal temperature (20˚C (68˚F)), one printing per disc.

Label Tape Printing
• Printing of approximately two 18mm tape cartridges under standard

printing conditions*

* When printing text or graphics that contain large areas of black, and

printing under cold temperatures can shorten battery life for both disc
label printing and label tape printing.