Casio CW-L300 - Manual (Page 39)

37 E
Barcode
EAN-13
EAN-8
UPC-A
UPC-E
ITF
CODE39
CODABAR
(NW-7)
Barcode Specifications
Check
Digit*1
Yes
Yes
Yes
Yes*2
No
Yes
No
Yes
No
Yes
Printed
Digits*3
13 digits
8 digits
12 digits
6 digits
4 to 22
digits
4 to 22
digits
4 to 22
digits
4 to 22
digits
4 to 22
digits
4 to 22
digits
Number
of Input
Digits*4
12 digits
7 digits
11 digits
6 digits
4 to 22 digits
Even numbers
only*5
3 to 21 digits
Odd numbers
only*6
2 to 20
digits
1 to 19
digits
4 to 22
digits
3 to 21
digits
Automatically
Added Digits
– 1 digit
– 1 digit
– 1 digit
– –
– –
– 1 digit
2 digits*7 –
2 digits*7 1 digit
– –
– 1 digit
Input
Charac-
ters*8
Numerals
Numerals
Numerals
Numerals
Numerals
Numerals
Alpha
A to Z
Symbols
(–)(.)(Space)
($)(/)(+)(%)
Numerals
Symbols
(–)($)(:)(/)
(.)(+)
Alpha
(first, last
only)*9
A to D
Check
Digit*1
*1 The check digit is automatically calculated in accordance with input data. For
EAN-13, EAN-8, and UPC-A, and when using a check digit with ITF, the
check digit is appended at the end of the printed digits. When using a check
digit with CODE39 or CODABAR, the check digit is appended one digit before
the final digit.
*2 UPC-E includes a check digit, but it is not printed as a numeral below the bar
code.
*3 The number of digits printed below a bar code equals the input characters
plus automatically appended characters.
*4 An error message is displayed whenever there are insufficient digits. The
printer will not allow input of too many digits.
*5 An error message appears and printing is impossible if an odd number of
digits are input when an ITF check digit is not being used. Append a zero to
the beginning of the digits and re-input.
*6 An error message appears and printing is impossible if an even number of
digits are input when an ITF check digit is being used. Append a zero to the
beginning of the digits and re-input.
*7 Both the start code and end stop code of CODE39 must be asterisks.
*8 An error message appears and printing is impossible if any characters other
than those specified here are used.
*9 With CODABAR, A, B, C, or D can be used as the start code and stop code.
An error message appears and printing is impossible if any other character is
used.