Compaq 8000 - Manual (Page 140)

8–24 Getting Started
Upgrading the PC
To Install an Expansion Card
1. If you are replacing or adding a new
expansion card, either the S or 8000 series,
align the edge of the expansion card with the
slot on the chassis and gently but firmly press
the card straight down into the expansion slot.
The whole connector should be seated
properly in the expansion slot.
Replacing or adding an expansion card on the
S/8000 (S shown)
❏ If you have an 8000 series, continue to
step 2.
❏ If you have an S series, skip to step 3.