Compaq 8000 - Manual (Page 139)

Getting Started 8–23
Upgrading the PC
3. Inside the PC on either the S or 8000 series,
locate the expansion slots on the system
board.
❏ If you have the 8000 series, continue to
step 4.
❏ If you have the S series, skip to step 5.
4. On the 8000 series, remove the screw that
secures the expansion card to the chassis.
5. Remove the expansion card from either an S
or 8000 series by holding the card at each
end and carefully rocking it back and forth
until the connectors pull free from the socket.
Be sure not to scrape the card against the
other components.
Removing an expansion card on the S/8000
(S shown)
6. If you are not replacing the old expansion
card with a new expansion card, reinstall the
expansion slot cover to close the open slot.
Insert the metal slot cover into the opened slot,
and screw a screw into the top of the cover to
secure it in place.