Compaq 8000 - Manual (Page 132)

8–16 Getting Started
Upgrading the PC
Reassembling the Diskette Adapter
To replace or add a new diskette drive on the
8000 series, you need to reassemble the adapter
around the diskette drive. (The S series does not
need an adapter.)
1. Lower the diskette drive into the adapter 1.
Ensure that the holes are aligned, and reinstall
the screws
2 that secure the diskette drive to
the adapter.
2. Press inward on each side of the bracket
brace 3, and lower the bracket until it snaps
into place over the diskette drive. Ensure that
the guide screws
4 are installed in the
adapter.
3. Return to “Replacing or Adding a Drive” on
page 8–12, and begin with step 1.
Replacing the diskette drive adapter on the
8000 series