Compaq 8000 - Manual (Page 119)

Getting Started 8–3
Upgrading the PC
5. Disconnect all external devices connected to
the PC.
6. Lay the PC on its side with the access panel
(the side with the pull grip) facing up.
7. Remove the access panel by loosening the
screw(s) 1 that secures the access panel to the
PC chassis. Slide the access panel back 2
about 1 inch (2.5 cm), and then lift it up and
off the unit.
Removing the PC access panel on the S series
model
WARNING: To reduce the risk of
personal injury from electrical shock
and/or hot surfaces, disconnect the
power cord from the wall outlet, and
allow the internal system components to
cool before touching.
WARNING: Beware of sharp edges inside
the chassis.