Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 71)

65
Maintenance and Cleaning
The EarlySense System is designed to provide a trouble-free and maintenance-free
operation. The only maintenance required is to keep the System clean and dry, and to
verify that there is no physical damage to the Bedside Unit and to the Sensing Unit.
The sensing unit should be replaced on an annual basis to ensure proper functionality of
the system.
Cleaning and Disinfection of the Bedside Unit
Gently wipe the exterior of the Bedside Unit using soft, slightly damp cloth / wipes
containing anti-septic substances. Wipes containing alcohols, Chlorohexidine, and bleach
material with concentration up to 5% can be used. Avoid excessive liquids.
Cleaning and Disinfection of the Sensing Unit
Gently wipe the Sensing Unit using a soft, slightly damp cloth / wipes containing anti-
septic substances. Wipes containing alcohols, Chlorohexidine, and bleach material with
concentration up to 5% can be used). Please ensure that the sensor is dry before re-use.
Avoid excessive liquids.
!
Caution
Avoid placing liquids or food on any part of the System. Do not allow
conductive fluids to leak into the active circuit components of the System
as this may cause a short circuit, which could result in an electrical fire. In
such an event, only fire extinguishers approved for use on electrical fires
should be used.
!
Caution
• Never open the Bedside Unit housing as this may damage the system.
• Handle the Bedside Unit with care. Do not drop, knock, or shake the
Bedside Unit. Rough handling can damage internal circuit boards.