Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual User Manual

Page 35

Choose Done to finish admitting the patient, or Cancel to return to the Home screen

without admitting the patient. If after 10 minutes you have not pressed a button the

screen will close automatically without admitting the patient.

5. After pressing Done, you will be asked two setting questions. The first is whether

you want to set a Bed Exit alert for this patient (Figure 14). If you choose Yes, the

Bed Exit alert will be enabled automatically with the default setting of sensitivity

level. If you choose No, the Bed Exit alert will be disabled. After answering the first

question, you will be asked whether

you want a Patient Turn reminder for this patient

(Figure 15). If you choose Yes, the Patient Turn Counter will be enabled

automatically with the default setting of a reminder every 2 hours, and if you choose

No, the Patient Turn Counter will be disabled. If after 1 minute you have not pressed

a button the screen will close automatically, the patient will be admitted and the Bed

Exit alert and the Patient Turn Reminder will remain disabled.