Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 48)

42
To suspend all red and yellow alerts for 15 minutes, press the hardware Suspend alerts for
15 min button (Figure 5). Press again the same button to enable alerts.
Alerts Setup
Setting Individual Alert Volume and Tone
Press the Alerts button on the bottom of the Home screen. The Alerts Setup screen will
open (Figure 25). When entering the Alerts Setup screen the current status of all alerts,
as shown in the following list, is displayed:
• Alert volume
• Tone
• Enabled/disabled
Figure 25: Alerts Setup Screen
• Click the plus or minus button to raise each alert volume
• Press buttons 1, 2 or 3 to choose a Tone.