Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 33)

27
Figure 11: Patient Admit Screen
2. Insert the patient's name (Letters only), MRN (ID) (Alphanumeric only), room
number (digits only) and bed number (Alphanumeric only). The MRN (medical
record number), Room No. and Bed No. must be entered for the patient to be
admitted. Choose a color to assign the patient to a nurse, in case you are using the
EarlySense Central Display Station (also referred to as “Patient Care Manager”)
3. To advance to the Patient Demographics screen (Figure 12) press Next.
4. To return to the Home screen without admitting the patient press Cancel or Home.
To admit the patient and return to the Home screen press Done. After pressing Done,
two questions regarding the required settings will show (Figure 14: Bed Exit Alert).
Note
The Patient Demographics screen will not open unless a patient
ID / MRN has been entered.