Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 38)

32
Figure 17: Admit Confirmation Screen
4. Touch Yes to admit a new patient and No to return to the Home screen without any
patient being admitted.
Pausing a Patient Monitoring Session
The Pause button stops the recording session temporarily, while the patient’s
identification and trends are saved. At any time the patient’s recording can be resumed,
and all the previous trends will be displayed as usual. Pause should be used when the
sensor is temporarily disconnected from the bedside unit to avoid a blue ‘Check Sensor’
technical alert from sounding, this function should be used for example when the patient
needs to be transported with his/her bed and the sensor needs to be disconnected from the
Bedside unit.
To pause the recording session:
1. Press the Pause button at the Home screen (See Figure 8). A Pause screen will be
displayed (Figure 18).