Turning the system on/off, Electrical failure – Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual User Manual

Page 30

Caution

Handle the Bedside Unit with care.

Do not drop, bang or shake the Bedside Unit. Rough handling
can break the internal circuit boards.

Figure 9: Positioning the Sensor and Bedside Units

Turning the System On/Off

Turn the EarlySense System "ON" by pressing the On/Off button on the front of the

Bedside Unit (See Figure 5). The Admit Window will automatically appear. After

admitting the patient, the Home Screen will be displayed.

To turn the system off, press the On/Off switch on the front of the Bedside Unit. You will

be asked if you are sure you want to turn the system off. Confirm turning off by hitting

Yes on the touch screen.

Electrical Failure

In case of electrical failure, the internal system battery allows the system to function for

approximately 30 minutes.

Check that the problem is not with the system itself by verifying that the power cable is

not damaged and is connected both to the Electrical Outlet and to the Bedside Unit.