Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 32)

26
Red Battery is almost empty.
System is about to shut
down.
The lightning symbol on the battery indicates that the battery is charging.
After Electrical Power is Restored
1. Make sure that the system is plugged into the Electrical Outlet.
2. Turn the System On by pressing the On/Off switch on the front of the Bedside Unit
(See Figure 5). The System automatically starts operating, as detailed above (see
Turning the System On/Off – page 24).
The internal battery automatically recharges when the electrical power is restored.
If System operation is not restored, contact EarlySense Ltd. customer support.
Patient Information (Admit/Discharge)
Admitting a Patient
The Admit Patient screen appears every time the system is switched on automatically
and can also be found by touching the Admit button in the upper right corner of the
Home screen.
Monitoring can take place without entering a patient ID / MRN; however it is advisable
to enter a new patient ID before starting the monitoring, otherwise the monitored
information will not be saved and the information will not be transferred to the main
nurses’ station.
1. Choose Admit in the Home Screen. The first Admit Patient screen will open (Figure
11).
Note
Only letters can be entered in the first and last name boxes and only
alphanumeric characters can be entered in the ID box.