Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 37)

31
Discharging a Patient / Ending a Patient Monitoring Session ("Discharge")
Warning
To avoid recording patient data under an erroneous
name you must perform the discharge procedure
before beginning monitoring of a new patient.
When the recording session is completed perform the "Discharge" procedure:
1. In the Home screen choose Discharge. The Confirm Discharge screen will open
(Figure 16)
2. Choose Yes.
Figure 16: Confirm Discharge Screen
3. You will be asked if you want to admit a new patient (Figure 17)